Hello everyone!! I’m Laura and I’m very excited to make this project on the Chibitronics blog showing this interactive card with the “Chibitronics LED Stickers” that I hope will inspire you!
If you want to know all the details, please keep reading 👇
For this card I chose the “A Capybara Christmas” stamps from Mama Elephant that I stamped with the black “Memento” ink and then painted it with alcohol markers. To give it more relief I used a white and a black marker, so I could intensify the lights and shadows.
On the other hand, I cut the “A Christmas Tree” die from Picket Fence Studios in white cardstock and painted it with distress oxide inks.
For the background I used the “Frame Tags Madison Avenue” creative cuts from Mama Elephant that I cut out of red cardstock.
I also used the “Brick and morter 6×8” stencil from Picket Fence Studios and the Distress Oxide “Tea Die” ink.
This card has an approximate measurement of 4×6 inches, so is an standard card.
For the sentiment I used the word “Jingle all the way” which belongs to the same set of stamps.
The circuit has been created using Chibitronics LED Stickers and Conductive fabric tape. This circuit will be powered by a 2025 battery and the lights will turn on with you press on the capybara on the left. This time I used the LED Sticker in yellow, that combines perfectly with the light of the star.
Here is a close up picture of the circuit.
Then I used a 3-millimeter-thick Foam plate, which I cut to the same size as the card and also made a round cut to insert the battery.
I also decorated the Christmas tree with the “Gems Mix Fire” from Picket Fence Studios, to give it a more real touch.
Finally I prepared the composition, glued all the pieces with the “Bearly Arts Precision Craft Glue” and this is how the result was!
I hope you like it and that it inspires you!
Here below you can find the link to all the products! 👇😉
A huge kiss and until next time!