Make a wish with Chibitronics LED Stickers

Hello everyone!! I’m Laura and I’m very excited to make this project on the Chibitronics blog showing this interactive card with the “Chibitronics LED Stickers” that I hope will inspire you!Β 

If you want to know all the details, please keep reading πŸ‘‡

For this card I chose the “Create Magic” stamps from Whimsy Stamps that I stamped with the black “Memento” ink and then painted it with alcohol markers. To give it more relief I used a white and a black marker, so I could intensify the lights and shadows.

For the background I used the β€œMini slimline bar none die” from Crafty Meraki that I cut out of blue cardstock and combined with yellow to match the stamps

This card has an approximate measurement of 4×6 inches, so is an standard card.

For the sentiment I used the word “Make a wish” from the same set of stamps.

The circuit has been created using Chibitronics LED Stickers and Conductive fabric tape. This circuit will be powered by a 2025 battery and the lights will turn on with you press on the right side. This time I used the rainbow lights, if you hold it down, the light changes through all the colors of the rainbow.

Here is a close up picture of the circuit.

Then I used a 3-millimeter-thick Foam plate, which I cut to the same size as the card and also made a round cut to insert the battery. 

Finally I prepared the composition, glued all the pieces and this is how the result was!

I hope you like it and that it inspires you! 

Here below you can find the link to all the products! πŸ‘‡πŸ˜‰

A huge kiss and until next time!

Make a wish with Chibitronics LED Stickers
Scroll to top