Materials
- Chibi Chip programmable microcontroller board
- Chibi Clip holder
Directions
Step 1: Remove example paper insert
Step 2: Remove the adhesive tape from your clip holder
Step 3: Flip the clip over so that the flat side showing “Chibitronics” faces up and open the clip.
Step 4: Hold your Chibi Chip with blue side facing up and Insert the flexible part into the three notches on the mouth of the clip.
Step 5: Close the clip and gently bend the board up over the clip.
Step 6: Slide the rigid board into the hook at the top of your clip.
You’re done! Now you can open and close the clip with your Chibi Chip attached.
To remove the Chibi Chip from your clip: slide out the flexible part from the clip and the rest of the board will slide off.
Happy making!