![](https://www.chibitronics.com/wp-content/uploads/2020/03/materials-1024x256.jpg)
Circuit Stickers works with virtually any conductive material, including Bare Conductive paint and Circuit Scribe conductive ink pens. Below are example circuits created using a wide variety of conductive materials as connective traces.
We suggest starting with a roll of copper tape as a starter because it is easy to use and sticks virtually to anything. It’s also very soft, conductive and solderable, so you can make the circuit as big as you want.
![](https://www.chibitronics.com/wp-content/uploads/2020/04/1-conductive-fabric.jpg)
Conductive Fabric
![](https://www.chibitronics.com/wp-content/uploads/2020/04/2.-Conductive-Thread.jpg)
Conductive Thread
![](https://www.chibitronics.com/wp-content/uploads/2020/04/3.-Carbon-based-conductive-paint.jpg)
Carbon-Based Conductive Paint
![](https://www.chibitronics.com/wp-content/uploads/2020/04/4.-Copper-tape.jpg)
Copper Tape
![](https://www.chibitronics.com/wp-content/uploads/2020/04/5.-Pencil-Graphite.jpg)
Pencil Graphite
![](https://www.chibitronics.com/wp-content/uploads/2020/04/6.-Aluminum-Foil.jpg)
Aluminum Foil
![](https://www.chibitronics.com/wp-content/uploads/2020/04/7.-Wire-and-Solder.jpg)
Wire and Solder