Hello everyone!! I’m Laura and I’m very excited to make my first post on the Chibitronics blog showing this interactive card with the “Chibitronics LED Stickers” that I hope will inspire you!
If you want to know all the details, please keep reading 👇
For this card I chose the “Passionate penguins” stamps from Sunny Studio which I painted with alcohol markers, and then I used a fine black marker and a white marker to give it a bit more relief.
Then I prepared the background, which measures 4×6 inches and which I painted with Ranger distress ink.
The circuit has been created using Chibitronics LED Stickers and Copper tape. This circuit will be powered by a 2025 battery and the lights will turn on with the press of the ‘press here’ spot.Here is a close up picture of the circuit.
Then I used a 3-millimeter-thick Foam plate, which I cut to the same size as the card and also made a round cut to insert the battery.
I hope you like it and that it inspires you!
Here below you can find the link to all the products!
White MegaPack (30 LED stickers)
A huge kiss and until next time!
Laura